NR Latex tubing Primeline Industries: Q & A => For use in slingshots?

Members

FAQ

Home

General » Q & A » For use in slingshots?

Show: Today's Messages :: Unanswered Messages :: Show Polls :: Message Navigator

For use in slingshots? [message #1845]

Fri, 30 October 2009 16:02

deimos
Messages: 1
Registered: October 2009
Location: Belgium

Junior Member

Hi,

I'm looking for tubing for use in slingshots.
I've gotten an email from your distributor in europe, and the thinnest tube is 14mm...
This is 40% thicker then the theratube silver I use in really heavy slingshots, and takes over 10kgs/22pounds to pull!per tube!

What pull weight is needed to extend the thinnest (14mm) tubes 300%?

Thanks in advance,
Deimos

Report message to a moderator

Re: For use in slingshots? [message #1846 is a reply to message #1845 ]

Fri, 30 October 2009 16:46

DonZarle
Messages: 52
Registered: April 2005
Location: Primeline Industries - Ak...

Member

Hi Demios

There are two sizes used for slingshots.

3/16" I.D. x 1/16" wall which is the most commonly used.
3/16" I.D. x 3/32" wall is uses rarely and for high power slingshots

Feel free to download our force calculator. It is located on the download page that is on our home page. You can use it to determine the resistance of tubing at different elongations.

Don

Report message to a moderator

Previous Topic:	Attaching non-latex piece to rubber tubing
Next Topic:	Elongation

Goto Forum:

-=] Back to Top [=-

[ Generate printable PDF ] [ Syndicate this forum (XML) ]

Current Time: Sat Sep 4 15:07:08 EDT 2010

Total time taken to generate the page: 0.01528 seconds

.:: Contact :: Home ::.